Trike City Scooters
|Here are some photos of athe
modication done to the swing arm to fit a CN250 engine.
This is the same concept needed to modifiy the swing for
all installations that require the swing arm to be
The CN250 engine is the Honda 250cc and used on the older Hondas such as the Honda Helix, CFMoto, Jonway, SHEN, ZNEN, and many other Chinese scooters. It is also known as the CF250 and the CH250. The piston cylinder head is vertical to the engine, pointing up about 75 degress.
Hopefully these photos will give you an idea how to modify the kit to fit the your scooter. The plates must be 3/16" or 1/4" steel and must mount to the shock bolt and at least one addtional point on each side.
Below you will see
how we modify the fender brackets when we when we needed more
room for the muffler.